1. The --- takes care of the limitations of the half adder
Ans=Full-Adder

2. The following registers are involved in the Fetch-Excute instruction cycle except ---
Ans=Accumulator(AC)

3. An incorrect answer known as --- is given if an arithmetic operation results in tranversal of the point where the endpoints are joined
Ans=Overflow.

4. The fundamental instruction set design issues include ----
Ans=Data types.

5. The ---- pulse signals the start of each\nmachine cycle from the control unit
Ans=ALE

6. The two\'s complement negation of decimal number 7 in binary is ----
Ans=1001


7. Micro-operations fall into one of the following categories ----
Ans=Transfer data from the flash to the hard drive.

8. ----- are needed by the control unit to determine the status of the processor and the outcome of previous ALU operations
Ans=Flags.

9. Intel 8085 timing and control signal does not include ----
Ans=Print(PT)

10. The following are the features of the READY signal, except ----
Ans=It is used to enable either I/O or memory modules for Read and write operations.